Peregrine
Peregrine Semiconductor is a supplier of the industry’s most advanced RF and mixed-signal communications ICs which are ideally suited for the wireless infrastructure and mobile wireless; broadband CATV/DTV; communications infrastructure; and high-reliability markets.
Manufactured on the Company’s proprietary UltraCMOS™ mixed-signal process technology, Peregrine products are uniquely poised to meet the needs of a global RF design community in high-growth applications such as WCDMA, EDGE and GSM digital cellular and mobile TV; broadband communications such as DTV/PCTV/DVR and telecom infrastructure; and in high-reliability applications such as industrial, automotive, military and satellite systems. Peregrine’s products feature monolithic integration and ease-of-development, which are essential to timely and cost-effective application design by our customers.
Peregrine UltraCMOS devices are manufactured through strategic relationships with world-class CMOS foundries located in Australia, Asia and Japan. The Company, headquartered in San Diego, California, maintains global sales support operations and a worldwide technical distribution network.
Market focus
Today’s highly mobile society has created a market demand for high-performance, cost-effective RF capability.
From GSM cellular handsets, CDMA digital cellular and RIM devices, to CATV/DTV/DVR and other high-growth wireless broadband applications, engineers in the RF market space push to develop more efficient, less costly designs.As well, space and defense programs including satellites with rad-hard requirements, have become paramount to the safety and security of all nations. As these designs evolve, so too does the RF signal chain, which has long been seen as one of the more complex parts of the design…until now.
Peregrine’s unique, patented UltraCMOS™ silicon-on-sapphire process technology allows us to design and manufacture products for the mobile wireless and wireless infrastructure; broadband communications; space, defense and avionics markets with a level of RF performance that is unmatched in the industry.
| (I)Switch Products | (II)DSA Products | (III)Hi-Rel Products |
| (IV)Prescalers | (V)PLL Freq Synthesizers | (VI)DuNE™ DTC Products (VII)Mixers/MOSFET Quad Array |
(i)Wireless 50-ohm Switches
The Peregrine UltraCMOS™ RF switches feature high ESD tolerance, high linearity, high isolation and low insertion loss, providing an exceptionally rugged high-performance solution for wireless applications. Developed on the patented UltraCMOS silicon-on-sapphire process, these multi-throw switches deliver an extraordinary combination of performance, price and monolithic integration. Simply stated, the new wireless RF switches from Peregrine are simply designed, and profoundly different.
| 50-ohm Switches | ||||||||||
| # Throws | Functional Diagram |
Part Number | OperatingFrequency (MHz) | IIP3(dBm @ 2 GHz) | P1dB(dBm @ 2 GHz) | Insertion Loss(dB @ 1 GHz) | Isolation(dB @ 1 GHz) | Typical IddμA @ 3V | VddRange (V) | Package |
| SPST | Absorptive SPST | PE4246 | 1-5000 | 53 | 33 | 0.80 | 55 | 33 | 2.7-3.3 | 6L 3×3 DFN |
| SPDT | Absorptive SPDT | PE4251 | 10-3000 | 59 | 30.5 | 0.60 | 62 | 55 | 3.0-3.6 4.5-5.5 |
8L MSOP exp |
| SPDT | Absorptive SPDT | PE4257 | 5-3000 | 55 | 31** | 0.75 | 64 | 8 | 2.7-3.3 | 20L 4×4 QFN |
| SPDT | Reflective SPDT | PE4210 | 10-3000 | 34 | 15 | 0.30 | 36 | 0.25 | 2.7-3.3 | 8L MSOP |
| SPDT | Reflective SPDT | PE4230 | 10-3000 | 55 | 32 | 0.35 | 39 | 29 | 2.7-3.3 | 8L MSOP |
| SPDT | Reflective SPDT | PE4237 | 10-4000 | 55 | 32 | 0.35 | 43 | 29 | 2.7-3.3 | 6L 3×3 DFN |
| SPDT | Reflective SPDT | PE4239* | 10-3000 | 45 | 27 | 0.70 | 32 | 0.25 | 2.7-3.3 | 6L SC70 |
| SPDT | Reflective SPDT | PE4242 | 10-3000 | 45 | 27 | 0.70 | 32 | 0.25 | 2.7-3.3 | 6L SC70 |
| SPDT | Reflective SPDT | PE4244* | 10-3000 | 45 | 26 | 0.60 | 39 | 0.25 | 2.7-3.3 | 8L MSOP |
| SPDT | Reflective SPDT | PE4245* | 10-4000 | 45 | 27 | 0.60 | 42 | 0.25 | 2.7-3.3 | 6L 3×3 DFN |
| SPDT | Reflective SPDT | PE4250 | 10-3000 | 59 | 30.5 | 0.65 | 51 | 55 | 3.0-3.6 4.5-5.5 |
8L MSOP |
| SPDT | Reflective SPDT | PE4259* | 10-3000 | 55 | 33** | 0.35 | 30 | 9 | 1.8-3.3 | 6L SC70 |
| SPDT | Reflective SPDT | PE4283 | 10-4000 | 57 | 32 | 0.65 | 33.5 | 8 | 2.0-3.3 | 6L SC70 |
| SP4T | Reflective SP4T | PE42440 | 50-3000 | 67 | 41.5 | 0.45 | 34 | 13 | 2.65-3.3 | 16L 3×3 QFN |
| SP4T | SP4T – 4RF | PE42641 | 50-3000 | 68 | - | 0.45 | 35 | 13 | 2.65-2.85 | 16L 3×3 QFN |
| SP5T | Absorptive SP5T | PE42451 | 450-4000 | 58 | 35 | 1.65 | 62 | 14 | 2.7-3.3 | 24L 4×4 QFN |
| SP6T | SP6T – 2Tx/4Rx | PE4268 | 100-3000 | 40 | 20(min) | 0.60 | 50 | 13 | 2.4-2.8 | 20L 4×4 QFN |
(ii)Broadband 75-ohm Switches
Simplify your next wireless design with the world’s only high-performance UltraCMOS™ broadband switches. Exceptional isolation, low insertion loss and a CMOS/TTL compatible, single-pin control make Peregrine RF Switches ideal for CATV, DTV and PCTV applications.
| CATV/DTV Switches – 75 Ω – with Unpowered Operation | ||||||||||
| # Throws | Functional Diagram |
Part Number | Operating Frequency (MHz) |
IIP2 (dBm) |
P1dB pwr/unpwr (dBm) |
Insertion Loss pwr/unpwr (dB @ 1 GHz) |
Isolation pwr/unpwr (dB @ 50 MHz) |
Isolation pwr/unpwr (dB @ 1 GHz) |
Typical Idd μA @ 3V |
Package |
| SPDT | Absorptive SPDT | PE42742 | 5-2200 | 90 | 30/24 | 1.00/2.20 | 97/95 | 75/75 | 8 | 20L QFN |
| SPDT | Absorptive SPDT | PE42750 | 5-2200 | 100 | 23.5 | 1.0 | 84/90 | 70/72 | 8 | 12L QFN |
| Broadband Switches – 75 Ω | |||||||||||
| # Throws | FunctionalDiagram | Part Number | OperatingFrequency (MHz) | IIP2(dBm) | CTB(dBc) | P1dB(dBm) | Insertion Loss(dB @ 1 GHz) | Isolation(dB @ 50 MHz) | Isolation(dB @ 1 GHz) | Typical IddμA @ 3V | Package |
| SPST | Absorptive SPST | PE4270 | 1-3000 | 80 | -90 | 30 | 0.75 | 90 | 63 | 8 | 6L DFN |
| SPST | Absorptive SPST | PE4271 | 1-3000 | 80 | -90 | 33 | 0.80 | 85 | 60 | 8 | 6L DFN |
| SPDT | Absorptive SPDT | PE4280 | 5-2200 | 75 | -85 | 26 | 1.10 | 72 | 60 | 8 | 20L QFN |
| SPDT | Absorptive SPDT | PE4256 | 5-3000 | 80 | -90 | 31 | 0.90 | 80 | 65 | 8 | 20L QFN |
| SPDT | Reflective SPDT | PE4231 | 1-1300 | 80 | -90 | 32 | 0.80 | 75 | 42 | 29 | 8L MSOP |
| SPDT | Reflective SPDT | PE4272 | 5-3000 | 80 | -90 | 32 | 0.50 | 70 | 43 | 8 | 8L MSOP |
| SPDT | Reflective SPDT | PE4273 | 10-3000 | 80 | -90 | 32 | 0.50 | 63 | 34.5 | 8 | 6L SC70 |
(iii)High Power Switches
Peregrine’s new high-power switch product line features HaRP™ technology enhancements to deliver a 50 Watt 1dB compression point with high linearity and exceptional harmonics performance. Other highlights of the PE42510A and PE42650A switches include: • 2fo and 3fo < -84 dBc @ 42.5 dBm • 10 Watts <8:1 VSWR (normal operation)
| High-Power RF Switches | |||||||||
| # Throws | Functional Diagram |
Part Number | Operating Frequency (MHz) |
P0.1dB (dBm @ 0.8 GHz) |
Insertion Loss (dB @ 0.8 GHz) |
Isolation (dB @ 0.8 GHz) |
Typ Idd μA @ 3.4 V |
Vdd Range (V) |
Package |
| SPDT | Reflective SPDT | PE42510A | 30-2000 | 45.4 | 0.40 | 29 | 90 | 3.2-3.4 | 32L 5×5 QFN |
| SP3T | Reflective SP3T | PE42650A | 30-1000 | 45.4 | 0.30 | 38 | 90 | 3.2-3.4 | 32L 5×5 QFN |
(iv)ATE Switches
With UltraCMOS RFICs on board, throughput is higher, accuracy is better, and test results are completely reliable. The newest HaRP™-enhanced RF devices from Peregrine Semiconductor, designed specifically for the demanding rigors of T&M/ATE equipment, deliver ultra-fast settling time and eliminate gate-lag and phase drift, ensuring the best test performance on the market today.
| Test Equipment/ ATE Switches | ||||||||||
| # Throws | FunctionalDiagram | Part Number | OperatingFrequency | IIP3(dBm) | P1dB(dBm) | Insertion Loss(dB @ 3 GHz) | Isolation(dB @ 1 GHz) | Typical IddμA @ 3.3V | VddRange (V) | Package |
| SPDT | Reflective SPDT | PE42551 | 9kHz-6.0GHz | 50 (@6GHz) | 34 (@6GHz) | 0.65 | 29 (@3GHz) | 20 | 2.5-3.0 | 20L 4×4 QFN |
| SPDT | Absorptive SPDT | PE42552 | 9kHz-7.5GHz | 65 (@7.5GHz) | 34.5 (@7.5GHz) | 0.65 | 47 | 15 | 3.0-3.6 | 16L 3×3 QFN |
| SPDT | Absorptive SPDT | PE42556 | 9kHz-13.5GHz | 56 (@13.5GHz) | 33 (@13.5GHz) | 0.92 | 46 | 21.5 | 3.0-3.6 | Flip Chip |
(V)Cellular Handset Switches
Peregrine’s high-performance cellular handset switches offer a different approach to solving the toughest high-power, multi-throw switching challenges and are the first and only CMOS-based devices that can be connected directly to the GSM handset antenna.
| Cellular/Communications Switches | ||||||||||
| # Throws | Functional Diagram |
Part Number | 2nd Harmonic | 3rd Harmonic | Insertion Loss (dB @ 1 GHz) |
Isolation (dB @ 1 GHz) |
IMD3 (dBm) | Package | ||
| 35dBm TX Input 850/900 MHz | 33dBm TX Input 1800/1900 MHz | 35dBm TX Input 850/900 MHz | 33dBm TX Input 1800/1900 MHz | |||||||
| SP4T | 2Tx/2Rx | PE42612* | -82 | -89 | -74 | -68 | 0.55 | 39 | - | Flip Chip |
| SP4T | 4RF | PE42641 | -86 | -87 | -81 | -80 | 0.45 | 35 | -110 | 16L 3×3 QFN |
| SP6T | 2Tx/4Rx | PE42632 | -87 | -86 | -78 | -76 | 0.65 | 38 | - | Flip Chip |
| SP6T | 2Tx/4Rx | PE42660 | -85 | -84 | -83 | -82 | 0.55 | 48 | - | DIE |
| SP6T | 6Tx | PE42662 | -40 | -40 | -40 | -42 | 0.60 | 38 | -111 | Flip Chip |
| SP6T | 2Tx/4Rx | PE4268 | -84 | -80 | -70 | -66 | 0.60 | 50 | - | 20L 4×4 QFN |
| SP7T | 2Tx/2TRx/3Rx | PE42671 | -83 | -82 | -78 | -78 | 0.65 | 46 | -111 | DIE |
| SP7T | 3Tx/4Rx | PE42672 | -85 | -84 | -79 | -77 | 0.6 | 44 | -109 | DIE |
| SP7T | 3Tx/4Rx | PE42674 | -85 | -84 | -79 | -76 | 0.65 | 39 | -112 | Flip Chip |
| SP9T | 2Tx/3TRX/4Rx | PE42692 | -75 | -73 | -75 | -73 | 0.60 | 43 | -111 | Flip Chip |
| SP9T | 2Tx/3TRX/4Rx | PE42694 | -75 | -73 | -75 | -73 | 0.60 | 43 | -111 | Flip Chip |
(VI)Hi-Rel Switches
The new PE95420 SPDT switch is the first Hi-Rel product to integrate HaRP-technology enhancements. These enhancements give unprecendented linerarity, eliminate Gate & Phase Lag, and eliminate Insertion Loss and Phase Drift. This 1 MHz – 8.5 GHz part has an input IIP3 of 60 dBm at 8500, High ESD protection 2000V HBM, 1 dB compression point of +33 dBm typ, high isolation of 48 dB at 3000 MHz.
| Rad-Hard Switches | ||||||||||
| # Throws | Functional Diagram |
Part Number | Operating Frequency (MHz) |
IIP3 (dBm @ 2 GHz) |
P1dB (dBm @ 2 GHz) |
Insertion Loss (dB @ 1 GHz) |
Isolation (dB @ 1 GHz) |
Typical Idd μA @ 3V |
Vdd Range (V) |
Package |
| SPDT | Absorptive SPDT | PE95420 | 1-8500 | 60 | 33 | 0.85 | 55 | 100 | 3.0-3.6 | 7L CSOIC |
| SPDT | Reflective SPDT | PE9354 | 10-3000 | 55 | 31 | 0.55 | 32 | 28 | 2.7-3.3 | 8L CSOIC |
(II)Digital Step Attenuators
(i)50 ohm DSAs
Peregrine’s highly linear, monolithic 50Ω RF DSA family offers a selection of resolutions, minimum attenuation step sizes and termination impedances. Its UltraCMOS™ foundation allows for a unique initial attenuation state at power-up.
| 50Ω RF Digital Step Attenuators (Monolithic) | ||||||||||
| # Bits | Functional Diagram |
Part Number | Attenuation (dB) | Programming Mode | Op. Freq (MHz) | Insertion Loss (dB) |
Input IP3 (dBm) |
Attenuation Accuracy (1GHz) |
Switching Speed (μs) |
Package |
| 2-bit | PE43204 | 18 range/ 6 dB steps | Parallel | 50-3000 | 0.6 | 61 | -0.25 / +0.40 of setting) | 0.03 | 12L 3×3 QFN | |
| 5-bit | PE4305 | 15.5 range/ 0.5 steps | Parallel, Serial | 1-4000 | 1.5 | 52 | +/-(0.25+3% of setting) | 1 | 20L 4×4 QFN | |
| 5-bit | PE4306 | 31 range/ 1.0 steps | Parallel, Serial | 1-4000 | 1.5 | 52 | +/-(0.30+3% of setting) | 1 | 20L 4×4 QFN | |
| 5-bit | PE43501 | 7.75 range/ 0.25 steps | Parallel, Ser-Addressable | 20-6000 | 2.3 | 58 | +/-(0.15+4% of setting) | 0.65 | 32L 5×5 QFN | |
| 5-bit | PE43502 | 15.5 range/ 0.5 steps | Parallel, Serial | 20-6000 | 2.4 | 58 | +/-(0.3+3% of setting) | 0.65 | 24L 4×4 QFN | |
| 5-bit | PE43503 | 31 range/ 1 steps | Parallel, Serial | 20-6000 | 2.4 | 58 | +/-(0.3+3% of setting) | 0.65 | 24L 4×4 QFN | |
| 6-bit | PE4302 | 31.5 range/ 0.5 steps | Parallel, Serial | 1-4000 | 1.5 | 52 | +/-(0.10+3% of setting) | 1 | 20L 4×4 QFN | |
| 6-bit | PE4309 | 31.5 range/ 0.5 steps | Parallel | 5-4000 | 1.6 | 52 | +/-(0.10+3% of setting) | 1 | 24L 4×4 QFN | |
| 6-bit | PE43601 | 15.75 range/ 0.25 steps | Parallel, Ser-Addressable | 20-6000 | 2.3 | 58 | +/-(0.2+4% of setting) | 0.65 | 32L 5×5 QFN | |
| 6-bit | PE43602 | 31.5 range/ 0.5 steps | Parallel, Serial | 20-5000 | 2.2 | 58 | +/-(0.3+3% of setting) | 0.65 | 24L 4×4 QFN | |
| 7-bit | PE43701 | 31.75 range/ 0.25 steps | Parallel, Ser-Addressable | 20-4000 | 1.9 | 59 | +/-(0.20+1.5% of setting) | 0.65 | 32L 5×5 QFN | |
| 7-bit | PE43702 | 31.75 range/ 0.25 steps | Parallel, Serial | 20-4000 | 2.0 | 57 | +/-(0.20+3% of setting) | 0.65 | 24L 4×4 QFN | |
| 7-bit | PE43703 | 31.75 range/ 0.25, 0.5 or 1.0 steps | Parallel, Ser-Addressable | .009-6000 | 1.8 | 59 | +/-(0.20+1.5% of setting) | 0.65 | 32L 5×5 QFN | |
(ii)75 ohm DSAs
Peregrine’s highly linear, monolithic 75Ω RF DSA family offers a selection of resolutions, minimum attenuation step sizes and termination impedances. Its UltraCMOS™ foundation allows for a unique initial attenuation state at power-up.
| 75Ω Broadband Digital Step Attenuators (Monolithic) | ||||||||||
| # Bits | FunctionalDiagram | Part Number | Attenuation (dB) | Programming Mode | Op. Freq (MHz) | Insertion Loss(dB) | Input IP3(dBm) | AttenuationAccuracy (1GHz) | Switching Speed(μs) | Package |
| 4-bit | PE43404 | 15 range/ 1.0 steps | Parallel, Serial | 1-2000 | 1.4 | 52 | +/-(0.25+7% of setting) | 1 | 20L 4×4 QFN | |
| 5-bit | PE4307 | 15.5 range/ 0.5 steps | Parallel, Serial, Direct | 1-2000 | 1.4 | 52 | +/-(0.15+4% of setting) | 1 | 20L 4×4 QFN | |
| 5-bit | PE4308 | 31 range/ 1.0 steps | Parallel, Serial, Direct | 1-2000 | 1.4 | 52 | +/-(0.20+4% of setting) | 1 | 20L 4×4 QFN | |
| 6-bit | PE4304 | 31.5 range/ 0.5 steps | Parallel, Serial, Direct | 1-2000 | 1.4 | 52 | +/-(0.15+4% of setting) | 1 | 20L 4×4 QFN | |
top
(iii)Hi-Rel DSAs
Peregrine Semiconductor’s recent advancements on UltraCMOS™ silicon-on-sapphire technology have enabled significant new product performance milestones in the radhard product portfolio. Our S-level standard and semi-custom RF ICs are based on our innovative high-volume commercial products, designed to meet the rad-hard, low-power needs of the space industry.
| Rad-Hard 50Ω RF Digital Step Attenuators (Monolithic) | ||||||||||
| # Bits | Functional Diagram |
Part Number | Attenuation (dB) | Programming Mode | Operating Freq. (MHz) |
Insertion Loss (dB) |
Input IP3 (dBm) |
Attenuation Accuracy (1 GHz) |
Switching Speed (μs) |
Package |
| 6-bit | PE94302 | 31.5 range/0.5 steps | Parallel, Serial | 1-4000 | 1.5 | 52 | +/-(0.25dB+3% of setting) | 1 | 28L CQFP | |
(IV)Prescalers
(i)RF Prescalers
The high-performance UltraCMOS™ RF Prescalers offers a fixed divide ratio of 2, 4, or 8 and an operating frequency ranging from near DC to 3.5 GHz on a nominal 3 V supply while drawing only 12 mA. Packaged in small 8-lead TSSOP, 8-lead MSOP, 6-lead SC70, these devices are ideal for microwave PLL synthesis solutions.
| Prescalers | |||||||||
| Product Description / Functional Diagram |
Part Number | Input OperatingFrequency (MHz) | Divide Ratio | Typical Idd(mA @ 3 V) | VddRange (V) | Package | |||
| Divide-by-2 | PE3501 | 400-3500 | 2 | 12 | 2.85-3.15 | 8L TSSOP | |||
| Divide-by-2 | PE3511 | DC-1500 | 2 | 8 | 2.85-3.15 | 6L SC70 | |||
| Divide-by-4 | PE3512 | DC-1500 | 4 | 8 | 2.85-3.15 | 6L SC70 | |||
| Divide-by-8 | PE3513 | DC-1500 | 8 | 8 | 2.85-3.15 | 6L SC70 | |||
(ii)Hi-Rel Prescalers
Ultra-low power utilization ensures that designs incorporating UltraCMOS RF ICs operate with the lowest power requirements. When compared to the higher- voltage GaAs, SiGe or bulk silicon devices, UltraCMOS delivers the most cost-effective solution on the market today.
| Rad-Hard Prescalers | ||||||||||
| Product Description / Functional Diagram |
Part Number | Input OperatingFrequency (MHz) | Divide Ratio | Typical Idd(mA @ 3 V) | VddRange (V) | Package | ||||
| Divide-by-2 | PE9301 | 1500-3500 | 2 | 13 | 2.85-3.15 | 8L CSOIC | ||||
| Divide-by-2 | PE9304 | 1000-7000 | 2 | 14 | 2.85-3.15 | 8L CSOIC | ||||
| Divide-by-2 | PE9311 | DC-1500 | 2 | 6.5 | 2.85-3.15 | 8L CSOIC | ||||
| Divide-by-4 | PE9309 | 3000-13500 | 4 | 16 (@2.6V) | 2.45-2.75 | 8L CSOIC | ||||
| Divide-by-4 | PE9312 | DC-1500 | 4 | 6.5 | 2.85-3.15 | 8L CSOIC | ||||
| Divide-by-8 | PE9303 | 1500-3500 | 8 | 14 | 2.85-3.15 | 8L CSOIC | ||||
| Divide-by-8 | PE9313 | DC-1500 | 8 | 6.5 | 2.85-3.15 | 8L CSOIC | ||||
(V)PLL Freq Synthesizers
(i)PLLs
Get maximum signal clarity with our ultra-low phase noise PLL synthesizers: the Integer-N family for demanding LMDS, MMDS, WLL and other base station systems, and our Fractional-N family for handheld and mobile wireless devices.
| Integer-N Phase Locked-Loop (PLL) Frequency Synthesizers | ||||||||||
| Part Number | ФDet Type |
Programming Mode |
Max Input Operating Freq. | Prescaler | Main Counters M, A |
Reference Counters |
Typical Idd (mA @ 3V) |
Package | ||
| (GHz) RF PLL | (MHz) Ref. | (MHz) Compare | ||||||||
| PE3336 | PD | Parallel, Serial, Hardwire | 3.0 | 100 | 20 | 10/11 | 9bit, 4bit | 6bit | 19 | 48L QFN |
| PE3341 | CP | Serial, EEPROM | 2.7 | 100 | 20 | 10/11 | 9bit, 4bit | 6bit | 20 | 20L QFN |
| PE3342 | PD | Serial, EEPROM | 2.7 | 100 | 20 | 10/11 | 9bit, 4bit | 6bit | 20 | 20L QFN |
(ii)Hi-Rel PLLs
Superior Phase Noise performance make Peregrine’s new Integer-N Phase Locked-Loop (PLL) Frequency Synthesizers ideal choices for applications where ultra-low phase noise is critical. Drop-in compatible with their predecessors PE9702 and PE9704, the PE97022 and PE97042 offer: • Dramatically reduced phase noise (-216 dBc/Hz/Hz) • 10/11 dual modulus prescaler • Parallel, Serial or Direct Mode access
| Military Integer-N Phase Locked-Loop (PLL) Frequency Synthesizers | ||||||||||||||
| Part Number | ФDet Type |
Programming Mode |
Max Input Operating Freq. (MHz) | Dual-mod Prescaler |
Main Counters M, A |
Reference Counters |
Typical Idd (mA @ 3V) |
Vdd Range (V) |
Package | |||||
| (GHz) RF PLL | (MHz) Ref. | (MHz) Compare | ||||||||||||
PE83336 |
PD | Parallel, Serial, Hardwire | 3.0 | 100 | 20 | 10/11 | 9bit, 4bit | 6bit | 20 | 2.85-3.15 | 44L CQFJ | |||
| Rad-Hard Integer-N Phase Locked-Loop (PLL) Frequency Synthesizers | ||||||||||||||
| Part Number | ФDet Type |
Programming Mode |
Normalized Phase Noise (dBc/Hz) |
Max Input Operating Freq. (MHz) | Prescaler | Main Counters M, A |
Reference Counters |
Typical Idd (mA @ 3V) |
Vdd Range (V) |
Package | ||||
| (GHz) RF PLL | (MHz) Ref. | (MHz) Compare | ||||||||||||
PE9601 |
CP | Parallel, Serial, Hardwire | -210 | 2.2 | 100 | 20 | 10/11 | 9bit, 4bit | 6bit | 24 | 2.85-3.15 | 44L CQFJ | ||
PE9701 |
CP | Parallel, Serial, Hardwire | -210 | 3.0 | 100 | 20 | 10/11 | 9bit, 4bit | 6bit | 24 | 2.85-3.15 | 44L CQFJ, DIE | ||
PE9702 |
PD | Parallel, Serial, Hardwire | -210 | 3.0 | 100 | 20 | 10/11 | 9bit, 4bit | 6bit | 24 | 2.85-3.15 | 44L CQFJ | ||
PE97022 |
PD | Parallel, Serial, Hardwire | -216 | 3.5 | 100 | 50 | 10/11 | 9bit, 4bit | 6bit | 45 | 2.85-3.45 | 44L CQFJ, DIE | ||
PE9704 |
PD | Serial, Hardwire | -210 | 3.0 | 100 | 20 | 10/11 | 9bit, 4bit | 6bit | 24 | 2.85-3.15 | 44L CQFJ, DIE | ||
PE97042 |
PD | Serial, Hardwire | -216 | 3.5 | 100 | 50 | 10/11 | 9bit, 4bit | 6bit | 45 | 2.85-3.45 | 44L CQFJ, DIE | ||
| Rad-Hard Delta-Sigma Modulated Fractional-N PLL Frequency Synthesizer | ||||||||||||||
| Part Number | Product Description | Programming Mode |
Normalized Phase Noise (dBc/Hz) |
Max Input Operating Freq. (MHz) | Prescaler | Main Counters M, A |
Reference Counters |
Package | ||||||
| (GHz) RF PLL | (MHz) Ref. | (MHz) Compare | ||||||||||||
PE9763 |
Low Phase Noise 3rd order DSM |
Serial, Hardwire | -210 | 3.2 | 100 | 50 | 10/11 | 9b, 4b, 18b | 6bit | 68L CQFJ, DIE | ||||
PE97632 |
Ultra-Low Phase Noise 3rd order DSM |
Serial, Hardwire | -216 | 3.5 | 100 | 50 | 10/11 | 9b, 4b, 18b | 6bit | 68L CQFJ, DIE | ||||
Peregrine’s DuNE™ Digitally Tunable Capacitors (DTCs) continue in a tradition of excellence, delivering outstanding performance and leading-edge specs – engineered to get you from design to market.
| DuNE™ Digitally Tunable Capacitor | ||||||||||||||
| Interface | FunctionalDiagram | Part Number | Min Capacitance(pF) | Max Capacitance(pF) | Tuning Ratio | Equivalent SeriesResistance (Ohm) | Quality Factor(Shunt, 1GHz) | VddRange (V) | Package | |||||
| Series | Shunt | Series | Shunt | Series | Shunt | 00000 | 11111 | Cmin | Cmax | |||||
| SPI Compatible | 5-bit, 32 state |
PE64904 | 0.60 | 1.10 | 4.60 | 5.10 | 7.7:1 | 4.6:1 | 1.40 | 1.33 | 35 | 25 | 2.3-3.6 | 10L 2×2 QFN |
| I2C Compatible | 5-bit, 32 state |
PE64905 | 0.60 | 1.10 | 4.60 | 5.10 | 7.7:1 | 4.6:1 | 1.40 | 1.33 | 35 | 25 | 2.3-3.6 | 10L 2×2 QFN |
(VII)Mixers/MOSFET Quad Array
Extend the reach of your base stations with Peregrine integrated receive mixers. High linearity and remarkable input IP3 performance will pick distant signals out of the haze. Integrated matching RF and LO networks and the tiny 6-lead 3×3 DFN or 20-lead 4×4 QFN package eliminate the need for bulky mixer modules or external RF baluns.
| MOSFET Quad Array Mixer Core | |||||||||
| Part Number | Operating Frequency (MHz) |
LO Drive (dBm) | Conv. Loss (dB @ 1 GHz) |
Isolation (dB, typ.) |
Input IP3 (dBm, typ.) |
Package | |||
| LO | RF | IF, Nom. | LO-RF | LO-IF | |||||
| PE4140 | 0.01-6000 | 0.01-6000 | 0.01-6000 | 0-20 | 6.5-7.5 | 25-40 | 25-40 | 36 | 6L DFN, DIE |
| PE4150 | 245.65-885.65 | 136-941 | 44.85-109.65 | -10 to -6 | 6.5-8.7 | 25-30 | 20-30 | 25 | 20L 4×4 QFN |
| MOSFET Quad Array Mixer Core: Low Frequency for Multiplexor Applications | |||||||||
| Part Number | Operating Frequency (MHz) |
LO Drive (dBm) | Conv. Loss (dB @ 1 GHz) |
Isolation (dB, typ.) |
Input IP3 (dBm, typ.) |
Package | |||
| LO | RF | IF, Nom. | LO-RF | LO-IF | |||||
| PE4141 | 0.01-1000 | 0.01-1000 | 0.01-1000 | 0-20 | 7.0-8.0 | 40 | 40 | 33 | 8L MSOP |
(I)RF Switches – 50 Ohm
(II)ATE/TE Switches – 50 Ohm
| Datasheet/ Product Brief |
Functional Diagram |
EK Manual | Sch./B.O.M. | SNP File | Material Declaration |
Application Notes |
| PE42551 | Reflective SPDT | - | Sch./B.O.M. | PE42552 Declaration | - | |
| PE42552 | Absorptive SPDT | - | Sch./B.O.M. | S3P File | PE42552 Declaration | - |
| PE42556 | Absorptive SPDT | - | Sch./B.O.M. | SnP File | PE42556 Declaration | - |
(III)High Power Switches – 50 Ohm
| Datasheet/ Product Brief |
Functional Diagram |
EK Manual | Sch./B.O.M. | SNP File | Material Declaration |
Application Notes |
| PE42510A | Reflective SPDT | - | Sch./B.O.M. | S3P File | PE42510A Declaration | - |
| PE42650A | Reflective SP3T | - | Sch./B.O.M. | S4P | PE42650A Declaration | - |
(IV)Broadband Switches – 75 ohm
| Datasheet/ Product Brief |
Functional Diagram |
EK Manual | Sch./B.O.M. | SNP File | Material Declaration |
Application Notes |
| PE4231 | Reflective SPDT | - | - | S2P File | PE4231 Declaration | AN 27 |
| PE4256 | Absorptive SPDT | - | - | S2P File | PE4256 Declaration | AN 27 |
| PE4270 | Absorptive SPST | - | - | S2P File | PE4270 Declaration | AN 27 |
| PE4271 | Absorptive SPST | - | - | - | PE4271 Declaration | AN 27 |
| PE4272 | Reflective SPDT | - | Sch./B.O.M. | S3P File | PE4272 Declaration | AN 27 |
| PE4273 | Reflective SPDT | - | - | S3P File | PE4273 Declaration | AN 27 |
| PE4280 | Absorptive SPDT | - | - | S2P File | PE4280 Declaration | AN 27 |
(V)Broadband Switches – 75 ohm with Unpowered Operation
| Datasheet/ Product Brief |
Functional Diagram |
EK Manual | Sch./B.O.M. | SNP File | Material Declaration |
Application Notes |
| PE42742 | Absorptive SPDT | - | Sch./B.O.M. | S3P File | PE42742 Declaration | AN 27 |
| PE42750 | Absorptive SPDT | - | Sch./B.O.M. | S3P File | PE42750 Declaration | - |